- SDI | HDMI Wireless Video Tranceiver Set
-
Longer Range
Transmit visually lossless video up to 3000ft with no delay -
20mhz Channels
Use more than twice as many Bolts in one location or avoid interference like never before -
2 New DFS Channels
Operate interference-free more often in the USA and Europe by making use of two newly introduced DFS channels -
20% Smaller Chassis
Not just smaller, but lighter too, allowing these models to integrate into any rig unnoticed -
More Robust Than Ever Before
Reach your Bolt’s full range and potential right out of the box with new software that provides the most robust wireless link we’ve ever created -
Rapid Reconnection
Reconnect times during a dropped link are now instantaneous once you move back into range -
Built-in HDMI To SDI Converter
Perfect for use with MoVI and other gimbals, Bolt’s TX has a built-in HDMI to SDI converter, allowing you to connect both your on-camera monitor and video source via the same device -
Individual Identity
Easily identify which Bolt TX and RX work together with removable colored top plates - Metadata and timecode support
- 3D LUTs
- Dual inputs/outputs
- Multicast capable
- Manual frequency selection
- USB 3.0 GRAB Engine included
In the Box:
- Bolt Pro 3000 3G-SDI | HDMI Video Transceiver Set
- 1 x Teradek Protective Case waterproof with custom foam (12in x 9in x 4.5in / 30.48cm x 22.86cm x 11.43cm)
- 5 x Wireless Antennas (2dBi 2.4/5.8GHz) - For RX
- 2 x Wireless Antennas (2dBi 2.4/5.8GHz) - For TX
- 1 x 2-pin Lemo to PowerTap 18 inch Cable
- 1 x Hot Shoe Adapter (1/4"-20 inch)
- 1 x Lightstand Adapter (1/4"-20 inch)
- 2 x SDI (BNC to BNC) Cable 10 inch
- 1 x HDMI 18in Cable (Type A to Type A)
- 1 x USB 3.0 Cable A to Micro B (3.ft Length)
- 1 x PSU 2-Pin Lemo to 18W AC Adapter 6ft cable
- 1 Year Warranty