Panasonic AW-HE40HKEJ

Firmware:

Ver 1.42

1. If using Standard Serial Communication commands to control the camera, there is a phenomenon where each zoom position data is slightly different. This issue was addressed.
2. In overHTTP mode, if the start and stop of IP video output are continuously performed for long hours, this IP video may no longer be output. This issue is solved.

Version 1.41

1. The Minimum bit rate for H.264 IP video has been lowered. [Web setup screen [Setup]] -> [Image screen[Image/Audio]] -> [IP video settings tab [Video over IP]] -> [H.264] -> [Max bit rate (per client)*]
   • 1920 x 1080*
     old version 3072k bps - 14336k bps
     Ver1.11 1024k bps - 14336k bps
   • 1280 x 720*
     old version 2048k bps - 8192k bps
     Ver1.11 512k bps - 8192k bps
   • 640 x 360
     old version 1024k bps - 4096k bps
     Ver1.11 512k bps - 4096k bps

   * Excluding when the frame rate is 60fps (when the system frequency is 59.94 Hz) Excluding when the frame rate is 50fps (when the system frequency is 50 Hz)

2. The minimum bit rate for recording to memory cards has been lowered. [Web setup screen [Setup]] -> [Basic screen [Basic]] -> [SD card tab [SD memory card]] -> [Recording format]
   • With 1280 x 720/29.97p or 1280 x 720/25p
     old version 2M bps - 8M bps
     Ver1.11 1M bps - 8M bps
   • With 1280 x 720/29.97p or 1280 x 720/25p and an average bit rate of 1 Mbps, recording times are as follows:
     4GB 8 hours and 30 minites (approx.)
     16GB 35 hours and 30 minites (approx.)
     64GB 145 hours (approx.)
3. Endless encoding of IP OUT The codec processing is currently designed to be paused and resumed every 8 hours. This specification will be discontinued.

Ver 1.32

1. All the following extended functions are installed, which have been provided through AW-SFU01G optional software. Accordingly, providing AW-SFU01G software will be discontinued in December 2015.
   1. HD-IP video output function that enables IP transmission of full-HD video output and multi-streaming output.
   2. USB Video Class and USB Audio Class that enable video and audio output via USB.
   3. The microSD card recording function that enables recording on a microSD card (sold separately) inserted into the unit as well as, via an IP network, controlling the recording-start/stop externally and downloading the recorded files.
2. The stability and extensibility of the H.264 transmission function via IP connection are improved.
   1. Long-hours transmission in overHTTP mode is made stable.
   2. Improvement of response to some commands.

Download the latest Firmware and Software